Tools for HPLC
Бренд: Agilent Technologies
Agilent LC systems arrive with a full complement of tools needed to perform general maintenance and operation procedures. Should you need additional or replacement tools, Agilent offers a selection of high-precision, high-quality, stainless steel tools.
Список продуктов
| Фото | Артикул | Описание |
|---|---|---|
 | 5067-5688 | 🔗Wrench, torque, 1 to 25 Nm, with 14 mm open wrench |
| 8710-2435 | 🔗Wrench, open-ended, 14 and 17 mm |
| 8710-1534 | 🔗Wrench, open-ended, 4 mm |
| 8710-0972 | 🔗Wrench, open-ended, 7/16 in and 3/8 in |
| 8710-0803 | 🔗Wrench, open-ended, 7/16 in and 9/16 in |
| 8720-0010 | 🔗Wrench, open-ended, 9/16 in and 5/8 in |
| 8710-2800 | 🔗Wrench, open end, 0.25 inch |
| 8710-2801 | 🔗Wrench, open end, 0.3125 inch |
| 8720-0025 | 🔗Wrench, open ended, 1/2 and 9/16 inch |
| 5067-5691 | 🔗Wrench, open, 19 mm |
| 8710-0806 | 🔗Wrench, open-ended, 1/2 in and 7/16 in |
| 8710-1841 | 🔗Wrench, open-ended, 12 mm |
| G4208-68700 | 🔗USB Memory Stick for G4208A |
| 5062-2486 | 🔗Velocity regulator 3/pk |
| 590-3003 | 🔗Window Etching tool, 3/pk |
| 8710-1712 | 🔗Wrench, adjustable, 12 in |
| 8710-1707 | 🔗Tubing cutter, Hi-Duty, for 1/8 in tubing |
| 5190-1442 | 🔗Tubing cutter, Precision, for 1/16 in stainless steel tubing |
| 8710-0007 | 🔗Tweezer, 4 3/4 in long |
| 5067-6605 | 🔗UIB Clamp Guide Kit |
| G4220-20041 | 🔗Torx bit, 10 x 25 mm |
| 8710-1708 | 🔗Tubing cutter blades, for Hi-Duty, 5/pk |
| 8710-1709 | 🔗Tubing cutter, for copper tubing |
| 79835-87330 | 🔗Solvent mixer |
| 5021-1831 | 🔗Test Capillary 0.25 x 500 mm no fittings |
| G4581-20522 | 🔗Torque driver extension |
| 5190-9571 | 🔗Torque driver kit |
| 5182-3465 | 🔗Screwdriver, Torx, T20 |
| 5067-6197 | 🔗Seal Handling Device for inserting seals into the 1260 LC series pump heads during maintenance |
| 450-1000 | 🔗Septum removal tool, knurled handle |
| 5062-8519 | 🔗Ferrule, Tefzel, yellow, 1/8 in ID, 8/pk |
| 5188-8057 | 🔗Fraction collection remote Y-cable, 3000 mm length, for connecting the fraction collector with the MS instrument |
| 9301-1446 | 🔗Glass syringe, 1 mL, luer tip, 0.05 scale |
| G4220-20013 | 🔗Hex bit, 4 mm, 89 mm length |
| 5023-2504 | 🔗Hex driver, slitted, SW-4 |
| 5023-2503 | 🔗Hex driver, SW-5 slotted |
| 5023-2502 | 🔗Hex driver, SW-6,35 slotted, tool for standard capillary fittings |
| 8710-2394 | 🔗Hex key, 9/64 in, 15 cm, T-handle |
| G7120-68708 | 🔗InfinityLab system tool kit, for Infinity II and III LC instruments |
| 79841-65501 | 🔗Injector lubricant, PTFE |
| 01018-23702 | 🔗Insert tool, for inserting wash seals |
| 5023-2524 | 🔗LC tools, hex key kit |
| 430-1020 | 🔗Magnifier, 20X |
| 89075-23800 | 🔗MCT Adjustment Tool |
| 5043-0915 | 🔗Mounting tool, plastic |
| 8710-1217 | 🔗Nut driver, 7 mm |
| 01100-68700 | 🔗Obsolete. No replacement recommendation. 256 MB Compact Flash Card |
| 8710-0004 | 🔗Pliers, needle nose |
| 8710-2790 | 🔗Screw driver, torque, preset adjustable |
| 5965-0027 | 🔗ScrewDriver hex 4mm |
| 5965-0028 | 🔗ScrewDriver hex2.5MM |
| RF0005T | 🔗Screwdriver, green handle, star shaped |
| 8710-2699 | 🔗3 mm wrench for nebulizer needle adjustment |
| 8660-0827 | 🔗Abrasive mesh, 4000 grit (4 µm) |
| 19251-00100 | 🔗Angled wrench for split/splitless septum nut |
| G7132-42000 | 🔗Bio Pump Head Mounting assistance |
| 5023-0282 | 🔗Bit kit for torque wrench |
| 5043-0277 | 🔗Blank nut, PEEK-ST, long, finger-tight |
| 5067-6127 | 🔗Blank nut, plug, stainless steel, for 10-32 coned fitting ports |
| 01080-83202 | 🔗Blank nut, stainless steel, for 1/16 inch Swagelok fitting ports |
| 5067-6141 | 🔗Blank nut, stainless steel, for M4 port |
| 01046-60105 | 🔗Cable, universal data |
| 5065-4493 | 🔗Capillary stainless steel 0.25 x 4000 mm U/U |
| 5181-8836 | 🔗Ceramic scribe column cutter, 4/pk |
| 8710-1346 | 🔗Cleaning brush for split/splitless inlet split vent fitting, FID, collectors |
| 5190-1401 | 🔗Cleaning powder, dielectric capillary, for ion transfer capillary cleaning |
| G4296-68715 | 🔗Compact tool kit |
| 5183-4620 | 🔗Cutting tool, for fused silica tubing, with rotating diamond blade |
| 5183-4670 | 🔗Diamond blade replacement kit for CE column cutter |
| 440-1000 | 🔗Ferrule removal tool |
 | RFT-2500 | 🔗Ferrule removal tool, 0.25-0.32 mm |
| RFT-5300 | 🔗Ferrule removal tool, 0.53 mm |
| RF0094T | 🔗Ferrule, red, outer diameter 1/32 inch |
Похожие товары
