Корзина пуста.
Вернуться в магазин
Отображение 8569–8592 из 12855
Agilent Technologies
G1820-65027 — Connector for plasma and auxiliary gas lines, for gas line connection to torch, 1pc of each
G1820-65050 — Nickel (Ni) skimmer cone, standard cone used with Agilent 7500 a/I ICP-MS, also suitable for 7500s ICP-MS, use with Ni sampling cone The point of the skimmer cone is easily deformed. A deformed …
G1820-65052 — Nebulizer gas connector to Quartz concentric nebulizer G1820-65138
G1820-65105 — Sample tubing, PFA, 0.5mm ID, 1.6mm OD, 5m. Standard sample uptake tubing used with Agilent ICP-MS
G1820-65138 — Nebulizer, concentric, quartz, recommended for organic and high purity analysis
G1820-65217 — Peristaltic pump tubing, Silicone, 3-stop, white/white tabs, 1.02 mm id, 1 pack of 6 pcs
G1820-65237 — Platinum (Pt) skimmer cone, Agilent 7500s/a/I, allows introduction of hydrofluoric acid and other reagents, use with Pt sampling cone.
G1820-65238 — ICP-MS sampler cone, Nickel-tip with Copper base. Suitable for 7500. Standard cone used with a/i/c/ce/cx-lens for most routine applications.
G1820-65239 — ICP-MS sampler cone, Platinum-tip with Copper base. Suitable for 7500. Standard cone used with s/cs-lens for semiconductor applications, optional for other …
G1820-65360 — ICP-MS sampler cone, Large Platinum-tip (18mm dia.) with Copper base. Suitable for 7500. Optional cone recommended for aqua regia digests, high viscosity and …
G1820-65435 — Screws for Skimmer Base, 4/pk
G1820-65478 — Sample tubing, PFA, 0.3 mm id, 1.6 mm od, 3 m, for online internal standard addition. Standard for all Agilent ICP …
G1820-65505 — Tank, drain, for organic solvent, polypropylene connector, 2 L
G1820-65526 — ISIS-DS, Sample tubing, PFA with PEEK guide, 0.15 mm id, 1.6 mm od, 70 cm, 5/pk
G1820-65527 — ISIS-DS, Sample tubing, PFA with PEEK guide, 0.2 mm id, 1.6 mm od, 70 cm, 5/pk
G1820-65531 — ISIS-DS Sample uptake tubing, PFA with PEEK guide, 0.3 mm id, 1.6 mm od, 70 cm, 5/pk
G1833-65088 — Obsolete. No replacement recommendation.
G1833-65092 — Platinum (Pt) skimmer cone with copper (Cu) base Agilent 7500c, use with Pt sampling cone.
G1833-65132 — Platinum (Pt) skimmer cone with copper (Cu) base Agilent 7500cs, use with Pt sampling cone.
G1833-65404 — ICP-MS lens polishing paper, 5 sheets each of waterproof polishing paper number 400 and 1200
G1833-65407 — Obsolete. No replacement recommendation. Skimmer base, stainless steel, standard for Agilent 7500a and 7500i, optional for 7500s
G1833-65408 — Obsolete. No replacement recommendation. Skimmer base, brass, standard for Agilent 7500s, optional for 7500a and 7500i
G1833-65430 — Clamp for connection of ball and socket joint on spray chamber outlet, quartz connector and torch inlet, 2/pk
G1833-65497 — Nickel (Ni) skimmer cone, standard cone with Agilent 7500c, but also suitable for 7500cs ICP-MS, use with Ni sampling cone
Ваше имя
Ваш e-mail
Ваше сообщение (не обязательно)
Имя пользователя или Email *Обязательно
Пароль *Обязательно
Запомнить меня Войти
Забыли свой пароль?
В данной категории нет подкатегорий
